The following information provides details on section 922(r) of Federal Law. Disclaimer: This guide is meant for educational purposes only, GunJunkie.net and is affiliates are not responsible for its use. We strongly urge individuals to follow all local, state and federal laws. GunJunkie.net is not qualified to offer legal advice, please contact a legal representative (lawyer) concerning this matter.
The 16 countable parts of an AK rifle. No more than 10 of these parts may be imported.
(1) Receiver*
(2) Barrel
(3) Trunnion
(4) Muzzle attachments(flash hiders, brakes, barrel extensions, barrel nuts)*
(5) Bolt
(6) Bolt carrier
(7) Gas piston*
(8) Trigger*
(9) Hammer*
(10) Disconnecter*
(11) Buttstock*
(12) Pistol grip*
(13) Forearm handguards*
(14) Magazine body
(15) Follower
(16) Floorplate
* Denotes the most commonly available U.S. manufactured parts.
On a typical stamped receiver rifle you need to replace 5 parts with no muzzle attachment and 6 parts with a muzzle attachment.
On a typical milled recevier rifle you need to replace 4 parts with no muzzle attachment and 5 parts with a muzzle attachment, because there isn't a barrel trunion, it is part of the receiver.
When building an AK pistol, these regulations do not apply. You can not have a stock or forward pistol grip on a pistol.
LocalCarHub.com - 1000's of Free Local Car Ads.
